Genie ACSCTG Type 1 garage door opener remote control

For sale is Genie ACSCTG Type 1 garage door opener remote control. Call to inquire 773-234-5l55

Manufacturer Part Number: B8QACSCT

The genuine Genie ACSCTG Remote comes with a 12 volt cylindrical battery and visor clip.

Some of the opener models using this remote are PRO99, CM9900, ISD9900, IDS1000, QuietLift 4560, H8000, PRO95, CM8600, 2060L, 3060L, 1024, 2024, 1022, 2022, 1042, 2042, GPS700IC, GPS1200IC, PMX500IC, PMX300IC, PCG400, PCG450, PCG500ML, PCG600, PCG650, PCG700ML, GCG350L, GCG350ML, H2000, 1020L, 2020L.

 

If you see this ad, the Genie ACSCTG Type 1 garage door opener remote control is available! Make me an offer. Call with questions.

INCLUDED IN PURCHASE

Genie ACSCTG Type 1 garage door opener remote control

 

Please see pictures for further details (click to enlarge)

http://www.chicagoremodelingcompany.com/ad/garage-opener-genie/

Genie ACSCTG Type 1 garage door opener remote controlGenie ACSCTG Type 1 garage door opener remote controlGenie ACSCTG Type 1 garage door opener remote controlGenie ACSCTG Type 1 garage door opener remote control

How do I Program my Genie Intellicode remote control?

Programming a Genie Intellicode remote control is very simple.

Follow these simple steps below.

1. Locate the Learn Code Button and Learn Indicator LED light.

  1. The Learn Code Button and Learn Indicator light is usually located on either on the front of the machine behind the Light cover, or on the rear of the machine. It is always located directly above the antenna wire.
  2. The learn button is usually very small and black or red.
  3. The Learn indicator LED light is always red.

2. Program Remote Control to your Genie Garage Door Opener.

  1. Press and release the Learn Code Button on the operator. (DO NOT HOLD the learn button unless you want to erase the machines memory and disable all programmed transmitters.(*see below))
  2. The learn indicator light will blink twice per second.
  3. Immediately Press the button on the remote that you want to operate the door.
  4. The learn indicator light will go solid.
  5. Press the same button of the remote once more.
  6. The Learn indicator will go out. (on some machines it will flash and go out)
  7. Your Genie Remote is now programmed.

3. Test Your Remote Control.

  1. Make sure the door is clear from obstructions, vehicles, people, ladders and pets. Then press the same button you programmed in the previous steps. The door should operate. If the door does not operate, repeat the steps above again. If the door still does not operate, check your wall console (wall button) lock switch to make sure it has not been switched to the lock position. If it is in the locked position, switch to unlock and repeat the steps again.

4. Program additional remotes.

  1. Repeat the steps above for each remote you want to program to your opener. Again, remember, DO NOT Hold the learn button while programming or you will disable any remote you have previously programmed.

  2. Genie Intellicode Garage Door Opener will store up to 7 remote transmitters or 6 remotes and 1 Wireless keypad in its memory. Programming you your vehicles HomeLink system counts as one of these transmitters

*Clearing All Transmitter Codes from your machines memory.

You may want to erase the machines memory if any of the following conditions apply.

  • If your remote has been lost or stolen.
  • If you have recently bought your home from someone else.
  • If you want to disable any remotes
  • If you have forgotten or do not know the PIN number to a wireless keypad. You will need to do this before reprogramming the keypad.

To clear the machines memory

  1. Press and hold the Learn Code button until the Learn Indicator Light turns off. This usually takes about 10 to 12 seconds.
  2. Test any existing remotes by pressing the remote button. All remotes should now be disabled.

  3. Re-program all remote controls following the steps above.

This listing was prepared with maximum accuracy, however, please understand that we are all human and there is always a room for an error. Please follow this link, we will keep it updated with more information. I will be glad to return your calls or emails.

The pictures are of the actual item. You are welcome to see and purchase it in person. Click contact me and schedule an appointment!

Shipping Terms

Local pickups are welcome. No Shipping is available for this one, no international shipping. I can provide limited assistance with delivery in 10 mile radius upon full payment. It is located in Skokie, IL 60077. It is close to Gross point and Dempster intersection. Closest zip codes are 60646 60076, 60659, 60077, 60645, 60630 and Jefferson Park, Skokie and Evanston are close by and there are following suburbs within 15 miles radius:

HINES, IL HINSDALE, IL ITASCA, IL KENILWORTH, IL LA GRANGE, IL LA GRANGE PARK, IL LINCOLNSHIRE, IL LOMBARD, IL LYONS, IL MAYWOOD, IL MELROSE PARK, IL MORTON GROVE, IL MOUNT PROSPECT, IL NILES, IL NORTHBROOK, IL OAK BROOK, IL OAK PARK, IL PALATINE, IL PARK RIDGE, IL PROSPECT HEIGHTS, IL RIVER FOREST, IL RIVER GROVE, IL RIVERSIDE, IL ROLLING MEADOWS, IL SCHILLER PARK, IL SKOKIE, IL STONE PARK, IL SUMMIT ARGO, IL TECHNY, IL VERNON HILLS, IL VILLA PARK, IL WESTCHESTER, IL WESTERN SPRINGS, IL WESTMONT, IL WHEELING, IL WILMETTE, IL WINNETKA, IL WOOD DALE, IL ADDISON, IL ARLINGTON HEIGHTS, IL BELLWOOD, IL BENSENVILLE, IL BERKELEY, IL BERWYN, IL BROADVIEW, IL BROOKFIELD, IL BUFFALO GROVE, IL CHICAGO, IL CICERO, IL CLARENDON HILLS, IL DEERFIELD, IL DES PLAINES, IL DOWNERS GROVE, IL ELK GROVE VILLAGE, IL ELMHURST, IL ELMWOOD PARK, IL EVANSTON, IL FOREST PARK, IL FORT SHERIDAN, IL FOX VALLEY, IL FRANKLIN PARK, IL GLENCOE, IL GLENVIEW, IL GOLF, IL HARWOOD HEIGHTS, IL HIGHLAND PARK, IL HIGHWOOD, IL HILLSIDE, IL

Payment Methods:

Cash (in person), certified check, bank transfers. Paypal may be used for deposit only.

 

similar Genie ACSCTG Type 1 garage door opener remote control: Visor Clip Genie Garage Door Opener Remote 37768A Git-1 ACSCTG Type 1 2